Loading...
Searching...
No Matches
DatagramSocket Class Referencefinal

A wrapper for a datagram (UDP) socket. More...

#include <juce_Socket.h>

Public Types

using Options = SocketOptions
 

Public Member Functions

 DatagramSocket (bool enableBroadcasting, const SocketOptions &optionsIn)
 Creates a datagram socket and allows specifying options related to the configuration of the underlying socket.
 
 DatagramSocket (bool enableBroadcasting)
 Creates a datagram socket.
 
 DatagramSocket ()
 Creates a datagram socket.
 
 ~DatagramSocket ()
 Destructor.
 
bool bindToPort (int localPortNumber)
 Binds the socket to the specified local port.
 
bool bindToPort (int localPortNumber, const String &localAddress)
 Binds the socket to the specified local port and local address.
 
int getBoundPort () const noexcept
 Returns the local port number to which this socket is currently bound.
 
int getRawSocketHandle () const noexcept
 Returns the OS's socket handle that's currently open.
 
int waitUntilReady (bool readyForReading, int timeoutMsecs)
 Waits until the socket is ready for reading or writing.
 
int read (void *destBuffer, int maxBytesToRead, bool blockUntilSpecifiedAmountHasArrived)
 Reads bytes from the socket.
 
int read (void *destBuffer, int maxBytesToRead, bool blockUntilSpecifiedAmountHasArrived, String &senderIPAddress, int &senderPortNumber)
 Reads bytes from the socket and return the IP address of the sender.
 
int write (const String &remoteHostname, int remotePortNumber, const void *sourceBuffer, int numBytesToWrite)
 Writes bytes to the socket from a buffer.
 
void shutdown ()
 Closes the underlying socket object.
 
bool joinMulticast (const String &multicastIPAddress)
 Join a multicast group.
 
bool leaveMulticast (const String &multicastIPAddress)
 Leave a multicast group.
 
bool setMulticastLoopbackEnabled (bool enableLoopback)
 Enables or disables multicast loopback.
 
bool setEnablePortReuse (bool enabled)
 Allow other applications to re-use the port.
 

Detailed Description

A wrapper for a datagram (UDP) socket.

This allows low-level use of sockets; for an easier-to-use messaging layer on top of sockets, you could also try the InterprocessConnection class.

See also
StreamingSocket, InterprocessConnection, InterprocessConnectionServer

Member Typedef Documentation

◆ Options

Constructor & Destructor Documentation

◆ DatagramSocket() [1/3]

DatagramSocket::DatagramSocket ( bool enableBroadcasting,
const SocketOptions & optionsIn )

Creates a datagram socket and allows specifying options related to the configuration of the underlying socket.

You first need to bind this socket to a port with bindToPort if you intend to read from this socket.

If enableBroadcasting is true, the socket will be allowed to send broadcast messages (may require extra privileges on linux)

◆ DatagramSocket() [2/3]

DatagramSocket::DatagramSocket ( bool enableBroadcasting)
explicit

Creates a datagram socket.

You first need to bind this socket to a port with bindToPort if you intend to read from this socket.

If enableBroadcasting is true, the socket will be allowed to send broadcast messages (may require extra privileges on linux)

◆ DatagramSocket() [3/3]

DatagramSocket::DatagramSocket ( )

Creates a datagram socket.

You first need to bind this socket to a port with bindToPort if you intend to read from this socket.

This constructor creates a socket that does not allow sending broadcast messages.

◆ ~DatagramSocket()

DatagramSocket::~DatagramSocket ( )

Destructor.

Member Function Documentation

◆ bindToPort() [1/2]

bool DatagramSocket::bindToPort ( int localPortNumber)

Binds the socket to the specified local port.

The localPortNumber is the port on which to bind this socket. If this value is 0, the port number is assigned by the operating system.

Returns
true on success; false may indicate that another socket is already bound on the same port

◆ bindToPort() [2/2]

bool DatagramSocket::bindToPort ( int localPortNumber,
const String & localAddress )

Binds the socket to the specified local port and local address.

If localAddress is not an empty string then the socket will be bound to localAddress as well. This is useful if you would like to bind your socket to a specific network adapter. Note that localAddress must be an IP address assigned to one of your network address otherwise this function will fail.

Returns
true on success; false may indicate that another socket is already bound on the same port
See also
bindToPort (int localPortNumber), IPAddress::getAllAddresses

◆ getBoundPort()

int DatagramSocket::getBoundPort ( ) const
noexcept

Returns the local port number to which this socket is currently bound.

This is useful if you need to know to which port the OS has actually bound your socket when bindToPort was called with zero.

Returns
-1 if the socket didn't bind to any port yet or an error occurred

◆ getRawSocketHandle()

int DatagramSocket::getRawSocketHandle ( ) const
noexcept

Returns the OS's socket handle that's currently open.

◆ waitUntilReady()

int DatagramSocket::waitUntilReady ( bool readyForReading,
int timeoutMsecs )

Waits until the socket is ready for reading or writing.

If readyForReading is true, it will wait until the socket is ready for reading; if false, it will wait until it's ready for writing.

If the timeout is < 0, it will wait forever, or else will give up after the specified time.

Returns
1 if the socket is ready on return, 0 if it times-out before the socket becomes ready, or -1 if an error occurs

◆ read() [1/2]

int DatagramSocket::read ( void * destBuffer,
int maxBytesToRead,
bool blockUntilSpecifiedAmountHasArrived )

Reads bytes from the socket.

If blockUntilSpecifiedAmountHasArrived is true, the method will block until maxBytesToRead bytes have been read, (or until an error occurs). If this flag is false, the method will return as much data as is currently available without blocking.

Returns
the number of bytes read, or -1 if there was an error
See also
waitUntilReady

◆ read() [2/2]

int DatagramSocket::read ( void * destBuffer,
int maxBytesToRead,
bool blockUntilSpecifiedAmountHasArrived,
String & senderIPAddress,
int & senderPortNumber )

Reads bytes from the socket and return the IP address of the sender.

If blockUntilSpecifiedAmountHasArrived is true, the method will block until maxBytesToRead bytes have been read, (or until an error occurs). If this flag is false, the method will return as much data as is currently available without blocking.

Returns
the number of bytes read, or -1 if there was an error. On a successful result, the senderIPAddress value will be set to the IP of the sender
See also
waitUntilReady

◆ write()

int DatagramSocket::write ( const String & remoteHostname,
int remotePortNumber,
const void * sourceBuffer,
int numBytesToWrite )

Writes bytes to the socket from a buffer.

Note that this method will block unless you have checked the socket is ready for writing before calling it (see the waitUntilReady() method).

Returns
the number of bytes written, or -1 if there was an error

◆ shutdown()

void DatagramSocket::shutdown ( )

Closes the underlying socket object.

Closes the underlying socket object and aborts any read or write operations. Note that all other methods will return an error after this call and the object cannot be re-used.

This method is useful if another thread is blocking in a read/write call and you would like to abort the read/write thread. Simply deleting the socket object without calling shutdown may cause a race-condition where the read/write returns just before the socket is deleted and the subsequent read/write would try to read from an invalid pointer. By calling shutdown first, the socket object remains valid but all current and subsequent calls to read/write will return immediately.

◆ joinMulticast()

bool DatagramSocket::joinMulticast ( const String & multicastIPAddress)

Join a multicast group.

Returns
true if it succeeds

◆ leaveMulticast()

bool DatagramSocket::leaveMulticast ( const String & multicastIPAddress)

Leave a multicast group.

Returns
true if it succeeds

◆ setMulticastLoopbackEnabled()

bool DatagramSocket::setMulticastLoopbackEnabled ( bool enableLoopback)

Enables or disables multicast loopback.

Returns
true if it succeeds

◆ setEnablePortReuse()

bool DatagramSocket::setEnablePortReuse ( bool enabled)

Allow other applications to re-use the port.

Allow any other application currently running to bind to the same port. Do not use this if your socket handles sensitive data as it could be read by any, possibly malicious, third-party apps.

Returns
true on success

The documentation for this class was generated from the following file:
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram